Especially manufactured for the high demands needed by...Enlarge
Especially manufactured for the high demands needed by modern CFRP and CFRP/Stacks/AL/TI.
The Full Nib drill allows the transition from a sandwich to a full nib tip, opening the door to a wider range of diamond geometries that do not exist in a sandwich diamond.
8 or 4 facet drills, destined to be the leader in hole drilling in the aerospace industry.More Details
The advantage of drilling and countersinking in one pass...Enlarge
The advantage of drilling and countersinking in one pass with the Full Nib drill or the Wafer drill.
The use of one tool drilling and countersinking saves costs such as the need to use a drill and countersink separately and reduces the amount of measuring and accurate machine set-up. Also reduces the amount of tools needed for replacement, which impacts directly on production line costs.More Details
With and without coolant thru holes these drills...
With and without coolant thru holes these drills have added flexibility with improved geometry and can drill a much wider range of CFRP/Stack materials.
The Telcon wafer (sandwich type), is the origin of this style of drill and has moved forward in different forms to end with a lizard shape tip, which has become a very successful form that has proved to be superior to vein type drills available in the market today.More Details
Are designed and manufactured especially for drilling into CFRP materials...Enlarge
Are designed and manufactured especially for drilling into CFRP materials where the work piece would require two drill diameter holes with higher accuracy and tolerance in CFRP materials, which also reduces to a minimum the possibility of delamination.
Telcon Step Drills are very popular with world leaders in the aerospace industry, amongst whom, are sub contractors that are participating in the Boeing 787 project.More Details
The integral pilot guides the countersink to the center of the hole...Enlarge
The integral pilot guides the countersink to the center of the hole,
preventing chatter and run out. All of the countersinks are available in all sizes with two or three flutes and cutting angles as needed.
The Interchangeable pilot countersink is ideal for the use of cutting...Enlarge
The Interchangeable pilot countersink is ideal for the use of cutting the same diameter chamfer with the same countersink but with different diameter pilots.
Damaged pilots can be replaced at a fraction of the cost with very significant savings.More Details
PCD veins allow for complex 3D tool geometries...Enlarge
PCD veins allow for complex 3D tool geometries.
No braze joints close to the Cutting edge.
Used on CFRP, Aluminum alloys, Bronze and other non-ferrous materials, Can be re-sharpened 3 times at 40% of initial cost.More Details
Center cutting point designed...Enlarge
Center cutting point designed for intricate milling tasks, in precision mechanics or for manufacturing printed circuit boards.More Details
More flutes allows a higher feed rate...                 Enlarge
More flutes allows a higher feed rate, because there is less material removed per flute, more flutes and more cutting edges increases the tool stability providing better quality work surface, cuts on working time and lower your cost and decreases the noise made by the tool.
Ball Nose End Mill, solid carbide body with diamond tip...Enlarge
Ball Nose End Mill, solid carbide body with diamond tip
Designed for use on all non-ferrous materials including Graphite, CFRP, Aluminum, Bronze, Copper, Ceramics, Magnesium.
Used to produce radius in the bottom of slots or pockets for added strength also used to create compound curves for molds.More Details
Telcon's PCD Helicon Full-Nib
Telcon's PCD Helicon