Micro Tools - Telcon Diamond Cutting Tools

PCD end-mill – micro ball-nose

PCD drill – Micro – Standard (MPDR Series)

PCD drills – Micro – Long

Telcon is among the very few manufacturers to produce micro PCD tools. There are two groups of tools: Micro diamond drills and Micro PCD end-mills. The machining is carried out utilizing highly sophisticated technology to achieve very accurate and fine cutting edge.

The PCD micro drills, ranging from 0.4mm, are used for instance in semiconductors for drilling very tough materials like monocrystalline silicon and Quartz.

The PCD micro end-mills, ranging from 0.8mm, are used for machining of hard ceramic materials which are common in the semiconductors, due to their highest purity, such as Zirconia, Quartz, Single crystal silicon, Al2O3 and SiC.

Want to order verity of specific sizes or ask a question:

Telcon Diamond Ltd. is a world leading manufacturer of Diamond PCD and CVD cutting tools for the machining of composite materials: CFRP, GFRP, MMC, CMC and hard ceramics. TELCON produces a wide range of tools used by many of the world’s leaders in the field including Boeing, Airbus, Lockheed-Martin, Spirit, ATK, Embraer, Denel, ELBIT and IAI. Telcon’s tools include: PCD tipped Drills, CVD diamond drills, Carbide drills, PCD Countersinks, Carbide tipped Countersinks, PCD tipped End Mills and CVD diamond End Mills and Carbide End Mills.

TELCON possesses the most advanced Grinding, and EDM machines and state of the art Quality control equipment. TELCON’s vacuum brazing equipment is highly controlled to ensure repeatability and reproducibility of brazing operation. TELCON uses world class PCD and carbide grades and CVD coatings. In addition to tools manufacturing, Telcon operating reconditioning services for PCD and carbide tools.